VIPER CAR AUTOMATIC EXTINGUISHING SYSTEM

CAR VIPER automatic fire extinguishing system is used to protect the enclosure of passenger car engines.

In the event of a fire, the hose will burn through at the point where the flame is created and start extinguishing the engine's protected area without causing major damage. There is no danger to the occupants of the vehicle. After extinguishing the fire, they evaporate and no extinguishing agent remains in the room. Installation of CAR VIPER is very easy.

The operating pressure at 20°C is 2.0 bar. When the engine is running, the pressure will increase up to 10 - 12 bar at 90 - 100°C.

Features:
- Volume of extinguishing agent: 500 g +/- 10 g
- Protected area: 1 m3
- Length of tube: 2.1 m
- Hose diameter: 18 mm
- The polyamide hose is filled with the gas agent FE-200 (heptaflurpropane) and is closed.