TIPSA BLINDEX HIGH PRESSURE FIRE FIGHTING HOSE 25-D

- 4-Layer Extruded Rubber Lay Flat Fire Hose
- unique 4-layer rubber hose specialy desidned for firefighting
- super-tought extruded outer layer made of syntehetic rubber coumpound
- highly resistand to plame, heat, abrasion and chemicals

More details

New product

121,00 €

- +

Add to compare

 
More info

Designed and recommended for firefighting, especially in municipal and industrial fire departments, petrochemical and nuclear plants, navies and other industrial services. Ideal for situations where a high level of protection, safety and long undisrupted service is required.

Construction:
Made from circularly woven 100% high tenacity synthetic yarn, completely protected and locked- in by a tough, highly resistant synthetic nitrile rubber & PVC blend, extruded through the weave and forming a single homogenous construction without the use of glues or adhesives. The BLINDEX hose is produced with a revolutionary process developed with the experience of two decades of research and production of rubber covered fire hoses. This technology allows the injection of the inner rubber lining and a double outer cover made of two different compounded rubbers all in one single operation process.

Lining Properties:
a. Ultimate Tensile Strength of the lining: Mini- mum guaranteed value of 1750 psi (12,000 kpa).
b. Ultimate Elongation: 450% minimum.

Abrasion Resistance:
In very extreme conditions where abrasion is the most serious concern BLINDEX will extend hose life. Excellent abrasion resistance when tested according to FM2111 and UL19 abrasion tests.

Ozone Resistance:
No visible signs of cracking appear on the lining or cover when tested in accordance with ASTM D518 Procedure B, 100pphm/104ºF (40ºC).

Chemical Resistance:
Exposure to seawater and contamination by most chemical substances, hydrocarbons, oils and greases has no effect on the short or long term performance of the hose. A chemical resistance chart is available and TIPSA will supply specific chemical resistance data when requested by the purchaser for unique applications.

Heat Resistance:
The hose is capable of withstanding a surface temperature of 1112º F (600ºC) for a minimum of two minutes without rupture or damage to the synthetic reinforcement when subjected to static pressure of 100 psi (700 kPa).

Service Temperature Range:
-4ºF (-20ºC) to 176ºF (80ºC). Special versions for higher and lower temperatures available upon request.

- working pressure: 40 bar
- testing pressure: 80 bar
- bursting pressure: 120 bar

Equipped with Storz couplings.

23 other products in the same category:

Compare 0

No products

To be determined Shipping
0,00 € Tax
0,00 € Total

Check out